WIN 7 Local FTP Slow

[kublai1]

Hi All,

OS: Windows 7 Ultimate, 64bit
using ioftpd 7.7.3 stable and last ioninja script
client: FlashFXP, cuteftp, filezilla
hardware: ESATA dock with 7200rpm drive

My problem is when I FTP locally all i can get is 12MB max using various FTP clients. I have ioftpd and flashfxp setup on the same PC so I'm FTP'ing locally. I have googled and these are the things I found and tried:

Large Send Offload v2 (IPv4) - Disable
Large Send Offload v2 (IPv6) - Disable

Turn off RDP Compression

ioftpd.ini I changed buffer from 8k-64k and same thing in FlasFXP and also tried default setting for transfers

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\Tcpip\Parameters set value to 1

Netsh interface tcp set global autotuning=disabled, normal

I have turned off firewall to do the test but still no results. When I do a drive copy from internal to Esata i get 97MB/S. I had the same thing setup in Windows XP and I get good results between 80MB - 90MB/s

[ArtX]

100mbit lan, 1gbit lan?

[kublai1]

Originally Posted by Carpo

100mbit lan, 1gbit lan?

It's 1gbit LAN. I have a WRT610N router running DD-WRT and using CAT6 cable from router to my PC. I do not have this problem under Windows XP with the exact same setup. I also switched from Auto negotiate to 1GBIT/FULL

[Yil]

Any chance this is a 2gb machine running win7 in which case it's a win7 bloat problem?

Are you using the internal IP to connect in both cases? I.e. 192.168.x.y? or the loopback 127. address? Most routers are smart enough to route external IP addresses of forwarded ports to the internal destination but I've found that they have a performance penalty for doing so. Not to mention the huge benefits using the loopback interface has.

I get no performance issues locally testing Flash to ioFTPD on the same machine, or even faster ioFTPD to ioFTPD via FXP on the same machine during testing even with SSL enabled.

[kublai1]

Originally Posted by Yil

Any chance this is a 2gb machine running win7 in which case it's a win7 bloat problem?

Are you using the internal IP to connect in both cases? I.e. 192.168.x.y? or the loopback 127. address? Most routers are smart enough to route external IP addresses of forwarded ports to the internal destination but I've found that they have a performance penalty for doing so. Not to mention the huge benefits using the loopback interface has.

I get no performance issues locally testing Flash to ioFTPD on the same machine, or even faster ioFTPD to ioFTPD via FXP on the same machine during testing even with SSL enabled.

I have a i920 machine with triple channel 9gb ram.

I am using internal ip of 192.168.0.x and also forwarded that port/ip to my router. In ioftpd.ini I used the external IP for PASV ports.

[Yil]

First, in FlashFxp try connecting via 127.0.0.1 and check the "use site IP for PASV" option to see if that makes a difference. My guess is this should solve the problem because as I mentioned using the external IP and having the router/modem forward it can sometimes be slow.

If that doesn't fix it, make sure you're not using SSL and see what happens. Then try installing the free version of serv-u or whatever and see if that also has a performance problem locally. It's possible you've got some really slow anti-virus, etc so check the CPU meter to see if anything really busy on any of the cores.

[colin watson]

could be anti-virus,i had avg and it slowed me down,i changed to eset and i noticed a difference.